Handcrafted Brass Floor-to-Ceiling Shelving Unit – Hammered Brass & Wood Wall Shelves

Handcrafted floor-to-ceiling brass shelving unit featuring solid wood shelves wrapped in hand-hammered brass. The shelving system includes two vertical brass poles extending from floor to ceiling, round brass mounting plates, and wall-mounted brass support brackets.

Each shelf has a solid wood core covered with hammered brass, including the shelf edges, creating a thick brass shelf appearance while maintaining a sturdy wooden structure. The hammered brass surface has a textured finish with subtle variations from the handworking process.

This custom brass shelving system is suitable for living rooms, kitchens, home libraries, offices, home bars, retail displays, and commercial interiors. It can be used as a brass bookshelf, wall-mounted display shelving unit, decorative brass shelving system, or floor-to-ceiling storage unit.

Floor-to-Ceiling Height & Adjustable Shelf Positioning

Standard Total Height: 250 cm (98.4 inches)

Tub diameter is 30 mm / 1.18 inches.

The brass shelving unit comes with vertical brass support poles measuring 250 cm (98.4 inches) in total height.

Adjustable Shelf Height

The brass wall-mounted support brackets are adjustable and can be moved up or down along the vertical poles, allowing you to position each shelf at your preferred height.

• Adjustable Shelf Positioning: Set the shelves higher or lower to suit your space.

• Custom Shelf Spacing: Adjust the distance between shelves according to your storage or display needs.

• Flexible Bottom Shelf Height: Position the lowest shelf 20 inches above the floor, closer to the floor, or higher, depending on your preference.

• Movable Wall Brackets: The brass support brackets can be repositioned vertically to accommodate your desired shelf arrangement.

Cut-to-Size Brass Poles

The 250 cm (98.4") vertical brass poles can be manually shortened to accommodate lower ceilings.

The round brass mounting plates are removable, allowing the poles to be cut to the required length and the plates reattached to the shortened ends.

Two-Piece Brass Pole Construction

For safer transportation and easier handling, each 250 cm vertical brass pole is supplied in two sections.

The two sections are connected during installation using an internal threaded connector, creating one continuous vertical support pole.

Important Installation Notes:

• The standard pole height is 250 cm (98.4").

• Each vertical pole arrives in two sections and requires assembly.

• The poles can be shortened to fit lower ceilings.

• The floor and ceiling mounting plates are removable and can be reattached after cutting.

• Shelf heights and spacing can be adjusted during installation.

• All shelf brackets and mounting points must be securely fixed before use.

• Cutting and installation should be performed by a qualified installer using suitable tools and mounting hardware.

For ceilings higher than 250 cm (98.4"), please contact us before ordering to discuss custom pole lengths.

Available Shelf Dimensions

Shelf Width (Left to Right):

• 24 inches

• 30 inches

• 36 inches

• 42 inches

• 48 inches

• 60 inches

Shelf Depth (Wall to Front Edge):

• 8 inches

• 10 inches

• 12 inches

• 14 inches

Number of Shelves:

• 2 Shelves

• 3 Shelves

• 4 Shelves

The selected width and depth apply to each individual shelf.

Example: Selecting 48" Width × 12" Depth × 3 Shelves means the unit includes three shelves, each measuring 48 inches wide and 12 inches deep.

Ceiling Height & Custom Measurements

The vertical brass poles are made according to your floor-to-ceiling height.

Measure the distance from your finished floor to your finished ceiling and provide the exact measurement when ordering.

For example, if your ceiling height is 96 inches, enter 96" in the ceiling-height field.

Shelf spacing can also be customized. Please contact us if you require specific distances between shelves.

Construction & Materials

• Shelf Material: Solid wood core wrapped in hammered brass

• Shelf Finish: Hand-hammered brass

• Vertical Supports: Brass floor-to-ceiling poles

• Mounting Plates: Round brass floor and ceiling plates

• Wall Supports: Brass wall-mounted shelf brackets

• Shelf Quantity: 2, 3, or 4 shelves

• Shelf Width: 24"–60"

• Shelf Depth: 8"–14"

• Overall Height: Made to your ceiling measurements

• Manufacturing: Handcrafted and made to order

Installation

The brass shelving unit is designed for floor, ceiling, and wall mounting. The vertical brass poles attach to the floor and ceiling using round mounting plates, while brass wall brackets support the shelves from behind.

Secure installation into suitable structural surfaces is required. Mounting hardware must be appropriate for the wall, floor, and ceiling materials.

Custom Brass Shelving

Custom widths, depths, shelf spacing, and configurations are available upon request.

For custom floor-to-ceiling brass bookshelves, hammered brass display shelves, brass kitchen shelving, wall-mounted brass shelving, or commercial brass shelving systems, contact us with your required measurements.

Production & Shipping

• Production Time: 2–4 weeks

• Shipping: 1 to 2 week

Please Note: The shelving unit shown in the photographs features three hammered brass-wrapped wooden shelves. Decorative accessories are not included.